Toyota Clevis Steering Upgrade

The Toyota Clevis Steering Upgrade is a requirement to achieve maximum suspension droop for our Toyota XLT kits. It features a FK Bearing 3/4" left-hand thread heims with jam nuts. We machine custom rack bolts which bolt the 17-4 Stainless Steel Clevis to the rack and pinion. The 1/2" Grade 8 hardware connect to the inner 3/4 heim joint, and 5/8" Grade 8 hardware connect the outer heim joints to the spindle. The Tie Rods are Machined from a solid piece of 17-4 Stainless Steel. We now offer Stock Length Tie Rods for all Toyota Mid-Travel kits. If using a stock Toyota spindle, the spindle will need to be double sheared for a 5/8" bolt. We also offer a heimed clevis steering upgrade when doing a 1" Lower Uniball Conversion with Solo Motorsports Fully-Fabricated spindles.

Applications

• 1st Gen Tacoma
• 2nd Gen Tacoma
• 3rd Gen Tacoma
• 3rd Gen 4Runner
• 4th Gen 4Runner
• 5th Gen 4Runner
• 1st Gen Tundra
• 1st Gen Sequoia
• FJ Cruiser
• GX 470
• GX 460

XLT Steering Clevis Includes

• 17-4 Stainless Steel Machined Inner Clevises
• 17-4 Stainless Steel Misalignment Spacers
• Machined Rack & Pinion Bolts
• FK 3/4" Inner Heims, Jam Nuts and 1/2 Grade 8 Bolts

An Add-on with our XLT Kit 

4.5" Over Steering Upgrade Includes

• 17-4 Stainless Steel Machined Tie Rods
• 17-4 Stainless Steel Machined Inner Clevises
• 17-4 Stainless Steel Misalignment Spacers
• Machined Rack & Pinion Bolts
• FK 7/8" Outer Heims, Jam Nuts, and 5/8 Grade 8 Bolts
• FK 3/4" Inner Heims, Jam Nuts and 1/2 Grade 8 Bolts

Used with LT kits that are 4.5" over stock 

3.5" Over Steering Upgrade Includes

• 17-4 Stainless Steel Machined Tie Rods
• 17-4 Stainless Steel Machined Inner Clevises
• 17-4 Stainless Steel Misalignment Spacers
• Machined Rack & Pinion Bolts
• FK 7/8" Outer Heims, Jam Nuts, and 5/8 Grade 8 Bolts
• FK 3/4" Inner Heims, Jam Nuts and 1/2 Grade 8 Bolts

Used with LT kits that are 3.5" over stock 

Stock Steering Upgrade Includes

• 17-4 Stainless Steel Machined Tie Rods  (
• 17-4 Stainless Steel Machined Inner Clevises
• 17-4 Stainless Steel Misalignment Spacers
• Machined Rack & Pinion Bolts
• FK 7/8" Outer Heims, Jam Nuts, and 5/8 Grade 8 Bolts
• FK 3/4" Inner Heims, Jam Nuts and 1/2 Grade 8 Bolts