HD Skid Plate Crossmember

Introducing a solution to our WEAK skid crossmembers!

Over the past 10+ years of building and breaking 4Runners, we've experienced a lot of "uncommon" failures... Unfortunately a bent front skid crossmember has become much more common! In fact, it seems like we see more bent crossmembers than straight ones these days.

The Problem: The factory skid crossmember is plenty strong enough for mall crawlers with stock skid plates, but for anyone with upgraded skids (or even stock skids that get some use) the factory crossmember is simply not going to hold up. Over time it will bend upward, making it difficult to install/remove the skid plates. Eventually it will even allow the skids to crowd your radiator and oil pan, which can lead to expensive repairs. The Solution: Opt Offroad's HD Skid Crossmember replaces your weak, thin (probably bent) factory crossmember, with a beefy unit that is up to the task of protecting your undercarriage. It is an easy, straightforward weld-on unit that is designed for compatibility with all aftermarket skid plates and bumpers. The HD Skid Crossmember is also cost effective, with Assembled and WIY options available to accommodate a wide range of installer experience and budgets.

Description:

• Precision laser-cut and bent 3/16" PNO steel
• Fully boxed end sections, for maximum strength
• Open topped center, for easy skid plate install/removal
• Skid plate mounting holes using factory spec locations & thread pitch (M8-1.25)

Pricing:

• Weld It Yourself: $125
• Assembled: $250

Timeline:

• Weld It Yourself: ~1 week
• Assembled: ~2 weeks

Install Help: Installation video coming soon!

FAQs:

Will this work with my aftermarket skid plate?

YES, this HD Crossmember utilizes the same mounting hole locations as your factory crossmember and is compatible with virtually all aftermarket skid plates. The mounting holes are also equipped with pre-welded hardware to make install/removal of your skid plates easy. (On WIY units, the welder will need to tack hardware on).

If I get the WIY version, how long will it take to assemble?

Assembly is very straightforward and takes about an hour of welding.

How difficult is the HD Crossmember to install, and how long will it take?

Installation is easy, and will take 1-6 hours, depending on the experience level and vehicle condition.