{"product_id":"panhard-correction-kits-pck","title":"Panhard Correction Kits (PCK)","description":"\u003ch1\u003ePanhard Correction Kits (PCK)\u003c\/h1\u003e\n\u003cp\u003ePanhard Correction Kits (PCK) are weld-on bracket kits to correct the angle of the panhard bar on 2″-4.5″ lifts. Read more about them below.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone wp-image-12389\" src=\"https:\/\/kpoffroad.com\/wp-content\/uploads\/2023\/03\/Screenshot-2023-03-24-at-18-54-18-Panhard-Correction-Kits-300x200.png\" alt=\"\" width=\"825\" height=\"550\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFitment:\u003c\/h2\u003e\n\u003cp\u003e3rd gen 4Runner 4th\/5th gen 4Runner GX 470\/460 FJ Cruiser 80-series LandCruiser 200-series LandCruiser 100-series LandCruiser 1st gen Sequoia  \u003c\/p\u003e\n\u003ch2\u003eAbout:\u003c\/h2\u003e\n\u003cp\u003ehi there. if you’re here, you already know what the eimkeith PCK is – and what it does. if not, you can \u003ca href=\"http:\/\/www.toyota-4runner.org\/sale-suspension-wheels-tires\/230779-fs-eimkeith-pck-panhard-correction-kits-%2486.html#post2565528\"\u003echeck out the 3rd Generation 4Runner version here\u003c\/a\u003e – and read about its origins \u003ca href=\"http:\/\/www.toyota-4runner.org\/3rd-gen-t4rs\/227431-panhard-bar-question.html\"\u003ehere on thread from T4R.org\u003c\/a\u003e. to proceed, just select the appropriate order button for your Toyota. simple!\u003c\/p\u003e\n\u003ch3\u003e3RD GEN 4RUNNER\u003c\/h3\u003e\n\u003cp\u003eYou’ve checked out the links above about the origins of this PCK, right? 🙂\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone wp-image-12391\" src=\"https:\/\/kpoffroad.com\/wp-content\/uploads\/2023\/03\/Screenshot-2023-03-24-at-18-54-23-Panhard-Correction-Kits-300x200.png\" alt=\"\" width=\"826\" height=\"550\"\u003e \u003cimg class=\"alignnone wp-image-12392\" src=\"https:\/\/kpoffroad.com\/wp-content\/uploads\/2023\/03\/Screenshot-2023-03-24-at-18-54-25-Panhard-Correction-Kits-300x200.png\" alt=\"\" width=\"826\" height=\"550\"\u003e\u003c\/p\u003e\n\u003ch3\u003e4TH \u0026amp; 5TH GEN 4RUNNER (and GX 470\/460, and FJ…)\u003c\/h3\u003e\n\u003cp\u003eAfter designing the PCK for the 3rd Generation 4Runner, I looked at a friend’s 5th Gen, and sure enough, same issues with lifted trucks and no real solution to restoring panhard bar geometry \u0026amp; factory handling characteristics. However, due to the frame design of the 5th Gen I was able to put all of the correction on the axle-side – which actually improves the factory roll center. Pretty cool. What’s even cooler is that this kit works for 4th gen 4Runners also. Check out the development of this PCK \u003ca href=\"http:\/\/www.toyota-4runner.org\/5th-gen-t4rs\/258512-designing-pck-5th-gen-need-some-input.html\"\u003ehere on a thread from T4R.org.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone wp-image-12394\" src=\"https:\/\/kpoffroad.com\/wp-content\/uploads\/2023\/03\/Screenshot-2023-03-24-at-18-54-31-Panhard-Correction-Kits-300x200.png\" alt=\"\" width=\"826\" height=\"550\"\u003e \u003cimg class=\"alignnone wp-image-12393\" src=\"https:\/\/kpoffroad.com\/wp-content\/uploads\/2023\/03\/Screenshot-2023-03-24-at-18-54-28-Panhard-Correction-Kits-300x200.png\" alt=\"\" width=\"826\" height=\"550\"\u003e\u003c\/p\u003e\n\u003ch3\u003e80-SERIES LANDCRUISER\u003c\/h3\u003e\n\u003cp\u003ewell, I finally got an FZJ80 to play with (triple-locked, of course – 🙂 ) and immediately set about to design some lifted suspension geometry correction for it, starting with the rear Panhard. -as you may already know from my other product offerings (particularly the PCKs I’ve designed for the other Toyota models above), the stuff I make is primarily weld-on (for strength and simplicity) but retains the use of the factory mounting\/pivot points, and as such is reversible in terms of returning the vehicle to stock without necessitating the removal of\u003c\/p\u003e\n\u003cp\u003ethe brackets.\u003c\/p\u003e\n\u003cp\u003e \u003cimg class=\"alignnone wp-image-12395\" src=\"https:\/\/kpoffroad.com\/wp-content\/uploads\/2023\/03\/Screenshot-2023-03-24-at-18-54-49-Panhard-Correction-Kits-231x300.png\" alt=\"\" width=\"424\" height=\"550\"\u003e\u003c\/p\u003e\n\u003cp\u003eMy designs are also scalable – as your lift or load levels change the rear suspension ride height changes – so your “lift height” is rarely the advertised height (unless totally unladen, in some circumstances) and your static ride height is really determined by the accessories that are added to the rear of the truck and\/or the typical load carried. I’ve designed my PCKs to accommodate changes in static ride height or lift levels by providing multiple options for bar mounting.\u003c\/p\u003e\n\u003cp\u003e \u003cimg class=\"alignnone wp-image-12396\" src=\"https:\/\/kpoffroad.com\/wp-content\/uploads\/2023\/03\/Screenshot-2023-03-24-at-18-55-06-Panhard-Correction-Kits-226x300.png\" alt=\"\" width=\"414\" height=\"550\"\u003e\u003c\/p\u003e\n\u003cp\u003eAnd finally, by paying particular attention to fitment while designing these parts to make installation as simple and self-aligning as possible by the end-user, I am able to maintain significant cost\/quality value across my product offerings – which is even more important after you’ve invested substantial funds into your shocks \u0026amp; coils. on my FJ80 PCK, the basic lift height correction positions are as follows: (keep in mind what I said about actual lift height at loaded ride height above for final positioning of your bar)   50mm\/2″ – use the lower hole on the axle bracket, stock hole on the frame side 75mm\/3″ – use the upper hole on the axle bracket, stock hole on the frame 100mm\/4″ – use the lower hole on the axle bracket and the new hole in the frame side bracket 125mm\/5″ – use the upper hole on the axle bracket and the new hole in the frame side bracket   interested? to order, you’ll need to know what axle is in your FJ80\/FZJ80 to select the appropriate kit for your truck. you will either have a panhard mount with a forward (toward the front of the truck) side that has a flat or V-shaped upper edge. order the corresponding kit for your axle.  \u003c\/p\u003e\n\u003ch3\u003e1ST GEN SEQUOIA\u003c\/h3\u003e\n\u003cp\u003eWell, I finally finished up the PCK for you first gen Sequoia guys! Right now it’s axle-side only, and provides 2.5″ of correction. It may or may not require spacing the factory bump stop to avoid contact with the overhead crossmember at full compression (you guys let me know, ok?). Also, I’m in the process of making a small frame side drop bracket for you guys that are in the 3.5-4″ lift range.  \u003c\/p\u003e\n\u003ch3\u003e200-series LANDCRUISER\u003c\/h3\u003e\n\u003cp\u003eAnd due to popular demand, I’ve made a PCK for the 200-series Land Cruiser. Pretty cool. \u003cimg class=\"alignnone wp-image-12397\" src=\"https:\/\/kpoffroad.com\/wp-content\/uploads\/2023\/03\/Screenshot-2023-03-24-at-18-55-11-Panhard-Correction-Kits-300x225.png\" alt=\"\" width=\"733\" height=\"550\"\u003e\u003c\/p\u003e\n\u003ch3\u003e100-series LANDCRUISER\u003c\/h3\u003e\n\u003cp\u003efor the 100-series Landcruiser we’re back to a 2-piece solution due to the overhead height constraints of the LC frame above the axle. The initial 2 inches\/50.8mm of correction are performed by the axle side bracket, with an additional 40mm available at the frame side, if needed.\u003c\/p\u003e\n\u003cp\u003e\u003cimg class=\"alignnone wp-image-12390\" src=\"https:\/\/kpoffroad.com\/wp-content\/uploads\/2023\/03\/Screenshot-2023-03-24-at-18-55-18-Panhard-Correction-Kits-300x223.png\" alt=\"\" width=\"740\" height=\"550\"\u003e \u003cimg class=\"alignnone wp-image-12398\" src=\"https:\/\/kpoffroad.com\/wp-content\/uploads\/2023\/03\/Screenshot-2023-03-24-at-18-55-15-Panhard-Correction-Kits-300x222.png\" alt=\"\" width=\"743\" height=\"550\"\u003e\u003c\/p\u003e","brand":"eimkeith","offers":[{"title":"3rd Gen 4Runner","offer_id":48002022867118,"sku":null,"price":93.5,"currency_code":"USD","in_stock":true},{"title":"4th Gen 4Runner","offer_id":48002022899886,"sku":null,"price":98.2,"currency_code":"USD","in_stock":true},{"title":"5th Gen 4Runner","offer_id":48002022932654,"sku":null,"price":98.2,"currency_code":"USD","in_stock":true},{"title":"FJ Cruiser","offer_id":48002023030958,"sku":null,"price":98.2,"currency_code":"USD","in_stock":true},{"title":"1st Gen Sequoia","offer_id":48002023162030,"sku":null,"price":98.5,"currency_code":"USD","in_stock":true},{"title":"GX 470","offer_id":48002022965422,"sku":null,"price":98.2,"currency_code":"USD","in_stock":true},{"title":"GX 460","offer_id":48002022998190,"sku":null,"price":98.2,"currency_code":"USD","in_stock":true},{"title":"80-Series Land Cruiser V-Shape - Late","offer_id":48002022834350,"sku":null,"price":104.0,"currency_code":"USD","in_stock":true},{"title":"80-Series Land Cruiser Flat - Early","offer_id":48002023063726,"sku":null,"price":104.0,"currency_code":"USD","in_stock":true},{"title":"100-Series Land Cruiser","offer_id":48002023129262,"sku":null,"price":110.2,"currency_code":"USD","in_stock":true},{"title":"200-Series LandCruiser","offer_id":48002023096494,"sku":null,"price":103.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/8734\/1998\/files\/5ad939d0-Screenshot-2023-03-24-at-18-54-18-Panhard-Correction-Kits.png?v=1781925676","url":"https:\/\/kpoffroad.com\/products\/panhard-correction-kits-pck","provider":"KPOffroad","version":"1.0","type":"link"}