Long Travel Suspension Kit | 00-06 Tundra & 00-07 Sequoia

The Long Travel Suspension Kit for Toyota Tundra 00-06 & Sequoia 00-07 will achieve 14″ of fully-functional wheel travel in 2WD or 4WD kits. The kit widens the trucks front stance 3.5″ per side. Combine this 14″ Long Travel kit with our Fabricated Spindles, 1″ Lower Uniball Conversion, or Steering upgrades for a bulletproof setup.

We took it a step above our competitors and made ¾” heims standard on the UCAs included in this kit! This will help to align your truck, even if you have a bent or fatigued frame.

Our Toyota W-I-Y UCA Double Shears are not included but highly recommended in order to keep the UCA cross shaft bolt from bending during hard driving/ Off-roading.

Application

• 2000-2003 Toyota Tundra 2WD and 4WD
• 2004-2006 Toyota Tundra 2WD and 4WD
• 2000-2007 Toyota Sequoia 2WD and 4WD
• **Note: Please specify your year truck when ordering**

Specs

• 14” of wheel travel
• 3 1/2″ per side increased track width
• Fits 35″ tire size
• Fiberglass required: Yes
• Extended Front Brake Lines
• 2WD/4WD compatible
• 4130 Chromoly Uniball cups
• MIG Welded construction
• Made in the U.S.A

Long Travel Suspension Kit Includes

• Tubular Control Arms with 3/4″ heim pivots and 1” uniballs
• BOXED Lower Control Arms with Polyurethane bushing pivots
• Steering Connectors
• DOT Stainless Brake Lines
• Limit Straps and weld-on frame tabs
• Black Semi-Gloss Powder coated finish
• Upper Shock Coil Bucket Adapters for 8″ stroke coil over shocks*
• Grade 8 Hardware
• 17-4 Stainless Steel Misalignment Spacers
• FK 3/4 heim joints
• FK 1″ Uniballs
• Extended 4WD Axle Shafts with factory spline count for Toyota Automatic Differential Disconnect Hubs (Customer must assemble axles with supplied axle shafts) (4WD KIT ONLY)

Variations

Small Lower Ball Joint: 00-02 Tundra Access Cab, 00-03 Sequoia (Square bolt pattern)

Big Lower Ball Joint: 04-07 Sequoia, 03-06 Tundra (Rectangle bolt pattern)

Please call us for clarification.