07-18 GM 1500 2wd Bolt On Kit

PERFORMANCE SPECS

• Wheel Travel – Averages 17″ Of Useable Wheel Travel ( Depending On Limit Strap / Bump Stop / Shock Configuration)
• Wheel Base: Extended 1.25″ Forward
• Track Width: Extended 4.5″ On Each Side
• Recommended Tire Size: 37″
• Recommended Wheel: 17 x 9″ w/4.5″ Backspacing (0mm Offset)

INCLUDES

• Upper Arms
• Lower Arms
• Spindles
• Heimed Tierods w/ Clevis Adapters
• Fabricated Coilover Adapters
• Cam Lockout Plates
• Grade 8 Hardware

REQUIRES

• 10″ 2.5″ Piggyback Coilovers  – These Are NOT Included In The Kit Above
• Welding Is NOT Required – This Is A Bolt On System, However The Bypass Hoops Must Be Welded Onto The Coilover Adapter And Frame For Installation
• Extended Brake Lines (Minimum 33″ Line End To End)
• Possible Extension Of Factory ABS Sensor Line (Depends On Wire Routing)
• Limit Straps – Recommend 8″ Limit Strap With Adjustable Clevis Kit (Can be Purchased In The Builders Components Section of Our Store)

OPTIONAL UPGRADES

• Extended Brake Lines – Stainless Steel Braided Brake Lines With Black Covers Specifically Engineered For This Application
• Bypass Hoops – Our Pre-coped Bypass Hoops Orient Off Of The Coilbucket Adapter And Weld To A Lower Portion Of The Frame -Shock Tabs Come Uninstalled To Aid Installers Of Positioning The Bypasses For Clearancing – Includes All Hardware
• Powdercoat Finish – Textured Black Or “LSK Grey” Finishes Available For All Coated Portions Of This Assembly (Shock Towers / Shock Hoops Ship Raw

IMPORTANT NOTES

• WHILE WEBSTORE MAY DISPLAY AN IN STOCK STATUS, WEBSTORE DOES NOT TRACK KIT INVENTORY IN REAL TIME – PLEASE CONTACT OUR SALES TEAM FOR CURRENT LEAD TIME ON KIT COMPONENTS
• Coilovers And Bypasses Are Custom Ordered And Not Always Stocked Per Application. Please Email Our Sales Team For Current Lead Time On Shock Packages
• Powdercoat Finish – Textured Black Or “LSK Grey” Finishes Available For All Coated Portions Of This Assembly (Shock Towers / Shock Hoops Ship Raw) – Please List Color Choice In Comments Section Of Your Order, Raw Finish Is Available But May Have An Additional Lead Time
• Upper Control Arm: Use 7/8″-14 Rod Ends – Replacement Rod Ends Can Be Purchased Through Our Online Store Under Builders Components
• Spindles: Use A 1.00″ FK Uniball (PN: WSSX16T) And Replacements Can Be Purchased Through Our Online Store Under Builders Components
• Lower Control Arms: Use A 1.50″ FK Uniball (PN: COMH24T) & LSK 1.75″ Delrin Bushings. Replacements Can Be Purchased Through Our Online Store Under Builders Components
• Permanent Frame Modification – Cam Lockout Plates Are Welded Into The Factory Cam Tab Location
• If You Or Your Installer Have Any Questions Please Reach Out To Our Sales Team